How to solve the problems of water seepage and material leakage between filter plates?

Time: Jan 21, 2025 Reading: 0

It may be that the feed pressure is too high, causing the filtering rate of the feed liquid to be too high; or the hydraulic pressure of the hydraulic system is

It may be that the feed pressure is too high, causing the filtering rate of the feed liquid to be too high; or the hydraulic pressure of the hydraulic system is low; there are holes in the filter cloth pleats and filter cloth, or there are lumps on the sealing surface; there is another possibility. It may be that the filter cloth is not cleaned according to regulations, or the cleaning effect is not good and does not meet the requirements.
When this failure occurs, you should first increase the corresponding compression pressure. If there is a problem with the filter cloth or sealing surface, replace the filter cloth in time, clean the debris on the sealing surface, and clean the filter cloth on time; finally, reduce the Feed pressure to normal value.

How to solve the problems of water seepage and material leakage between filter plates?

Related News

Related products