How to play the best sludge treatment effect of plate and frame filter press?

Nowadays, no matter what kind of equipment it is, it can exert excellent working efficiency under good operating condition, so does the plate and frame filter press, which adjusts all preparation work and parameters to the best state, it can naturally achieve better sludge treatment effect. But for sludge treatment enterprises without experience in using plate and frame filter press, what details should be paid attention to when adjusting to the best sludge treatment effect? From what aspects?

As followsBeibang environmental protectionThe technical engineer made a summary of the adjustment of plate and frame filter press:Plate and frame filter pressThe pressing contact part between the filter cloth and the filter plate should be guaranteed to be flat and no wrinkles can occur, so as to prevent the filter cloth from being squeezed by the filter plate to form damage or mud leakage. To prevent the tail of the buckle from being too long or reaching into the place where the filter plate is pressed to damage the filter cloth, or form mud leakage, the short tail should be cut off. When the plate and frame filter press device is installed, it should be noted that there is no foreign matter or larger sludge particles between the filter cloth and the filter plate, and larger sludge particles or foreign matter may be in the plywood, which will easily cause damage to the filter plate or filter cloth.

In addition to the details that need to be paid attention to above, beibang environmental technical engineer said that the following points should also be paid attention:

1. Check carefully at any time whether each joint is firm and whether the running contact of each component is good. If any abnormality is found, inform the repair personnel to repair it in time. The plate and frame filter press has strict requirements on the electric control system, and the insulation and reliability tests should be conducted regularly. If the movement accuracy is poor and insensitive caused by electrical components are found, it should be repaired or replaced timely.

2. the pulling plate trolley, sprocket chain, bearing, piston rod and other parts should be checked regularly to keep all the running parts clean, smooth and functional, and the operation instruction of hydraulic filter press is good, in order to ensure the action is sensitive, the synchronization of the pulling plate trolley and the suspension degree of the chain should be adjusted in time.

3. The maintenance of hydraulic system mainly refers to the inspection and maintenance of hydraulic components and the tightness of each interface. If the plate-and-frame filter press is not used for a long time, the filter plate of the plate-and-frame filter press should be cleaned and discharged regularly on the frame of the filter press. Dry the filter cloth after cleaning; the exposed parts of the piston rod and the integrated block should be coated with butter.

4. often check the sealing surface of the filter plate to ensure its cleanness and cleanness; before pressing, carefully check the filter cloth to ensure that the filter cloth is free from folding, damage and slag inclusion, making it smooth and flawless; the plate and frame filter press should always wash the filter cloth to ensure good permeability of the filtrate.

Beibang environmental protection is a company integrating the development, production and sales of high-end overall filter equipment. While providing customers with high-quality and efficient products, we also provide general solution of filtration technology and general contracting service of environmental engineering. We have our own material laboratory, which can provide the inspection service of materials to customers, so as to design corresponding and special sewage treatment scheme. Beibang environmental filter press will be your preferred sewage treatment equipment, and beibang environmental protection will also become your permanent partner.