With the help of hydraulic chamber filter press, quartz sand wastewater can be effectively recycled. And filter cakes generated is more easily to be treated....
Quartz sand wastewater mainly comes from sand-washing process. It is featured with high viscosity and large output. In order to achieve recycle of wastewater, you may need hydraulic chamber filter press to help you.
After adding flocculants and sediment, the upper waster can be directly used for sand-washing again. The bottom sludge will be treated by chamber filter press.
Firstly, slurry pump will send quartz sand wastewater to filter press. The wastewater pass through feeding inlet and enters filter chamber (Before filtration, the keep plate will tightly press filter plates, and space between each two filter plates is called filter chamber.).
Secondly, the filter cloth on filter plates will obstruct solid materials. Then the solid materials will accumulate on the filter cloth, and gradually forms filter cakes.
Thirdly, the liquid will pass through filter cloth and discharge from water nozzles. The filtrate can be again used for washing sand.
Finally, when no filtrate flows out, you can control automatic plate shifter by PLC system to pull filter plates to discharge filter cakes.
When all filter cakes are discharged, the keep plate will again press filter plates. Then next filtration starts.
With the help of hydraulic chamber filter press, quartz sand wastewater can be effectively recycled. And filter cakes generated is more easily to be treated.
Many people are very concerned about the price when purchasing a chamber filter press, but in the market its price on the market is also uneven. What is the reason for this?
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号