After filtration, solid materials in wastewater will become filter cakes with lower moisture, which is more convenient for stack and transportation. If you want to know detailed information about hydraulic filter press, please contact us....
Papermaking wastewater is not easy to meet discharge standard. After a series techniques, filter press will separate solid materials and liquid in the wastewater. Now, let us know the detailed treatment process of papermaking wastewater.
Firstly, hydraulic screen will trap short fiber and other impurities. Then the wastewater will enter regulating reservoir. The reservoir will homogenize water quality and adjust water yield, so as to reduce influence of water quality and yield fluctuation on subsequent biochemical treatment.
Secondly, pump sends wastewater to air floatation tank. Then you need to add coagulant and flocculants (PAC, PAM) to make solid materials form into flocculating constituents. At the same time, the tiny bubbles from dissolved gas-water preparation will pick up flocculating constituents, so as to achieve solid liquid separation.
Thirdly, wastewater will enter sedimentation tank after pulse hydrolysis acidification and bio-contact oxidation.
Finally, the upper liquid achieves discharge standard. You can recycle it or discharge directly. The bottom sludge will be treated by hydraulic filter press. After filtration, solid materials in wastewater will become filter cakes with lower moisture, which is more convenient for stack and transportation. If you want to know detailed information about hydraulic filter press, please contact us.
Many people are very concerned about the price when purchasing a chamber filter press, but in the market its price on the market is also uneven. What is the reason for this?
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号