Sludge treatment has always been valued by various industries. The chemical, sand washing, mining, drilling and other industries have a large amount of daily sludge. Direct discharge not only causes serious environmental pollution, but also will be...
Sludge treatment has always been valued by various industries. The chemical, sand washing, mining, drilling and other industries have a large amount of daily sludge. Direct discharge not only causes serious environmental pollution, but also will be punished by relevant departments. Therefore, sludge must be discharged after treatment. The filter press is a sludge dewatering and concentration equipment. According to different needs, the selection of filter press is also different. So how much is a 300 ton/ day filter press?
Daily processing 300 tons filter press configuration plan
Taking ten hours a day as an example, it needs to handle 30 tons sewage per hour, this amount is actually very large, we can choose a variety of ways to achieve.
Four 250 square-foot box filter presses, four equipment, the floor space will not increase a lot. If it is matched with a program-controlled automatic pulling system, one person can operate four machines and maintain one of them. Time will not have a big impact on the entire sludge treatment, more users are willing to choose this program.
How much is a 300-ton filter press per day
The above-mentioned three schemes are actually only a rough selection, and the specific depends on the solid content, particle size, viscosity and other factors of the sludge. When the above schemes are selected, the price of each equipment is also different. The price of equipment is naturally higher,
The key depends on how customers choose.
If you want to know how much a specific 300-ton filter press is processed per day? You are welcome to contact BBNEP (19913820627), we will recommend the appropriate equipment for you according to your specific situation. And we are a filter press manufacturer, each equipment is sold at the factory price, which can reduce your unnecessary costs.
Many people are very concerned about the price when purchasing a chamber filter press, but in the market its price on the market is also uneven. What is the reason for this?
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号