In terms of municipal and dying wastewater treatment, BBNEP membrane filter press will be one of efficient equipment. If you want to keep the equipment in high working efficiency and good filtration performance, you may need to know about its operati...
In terms of municipal and dying wastewater treatment, BBNEP membrane filter press will be one of efficient equipment. If you want to keep the equipment in high working efficiency and good filtration performance, you may need to know about its operating process. Detailed information is as below.
Firstly, you should check the whole machine before operation. You should check the cleanness and completion of filter plates and filter cloth. Then, you can start up oil pump to make piston press all filter plates and form sealed chambers. When the pressure achieves specified value, the hydraulic system starts to intervene automatically.
Secondly, you can turn on the slurry pump to send sewage into chambers. With the increase of sewage in the chambers, the membrane filter press will automatically adjust press force to keep good filtration performance. When no filtrate flows out, you can introduce air or water into membrane filter press to make filter plates expand and deeply press filter cakes.
Finally, you should close feed pump and loosen keep plate to relief plate. Then you can control automatic plate shifter to discharge filter cakes.
This is the complete filtration process. If you have any requirements and questions, you can contact us.
Many people are very concerned about the price when purchasing a chamber filter press, but in the market its price on the market is also uneven. What is the reason for this?
1. Good sealing effect. 2. The filter cloth is easy, fast and safe to load and unload. 3. The moisture content of the filter cake is low. Compared with the original membrane filter press, the moisture content is reduced by 5%-10%, and the filter cake falls off automatically.
1. Electro-hydraulic, automatic pressure maintaining, manual pulling plate. 2. Automatic plate puller: controlled by a hydraulic motor puller plate appliance or an electric motor puller plate appliance. The puller plate can be numerically controlled to buffer, extending the service life of the filter plate handle, and can be paused or restarted at any time according to production needs.
Filtration Area:30-80㎡
Number of Filter Plates:23-62pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
Number of Filter Frame:19-50pieces
Filtration Area:10-20㎡
Number of Filter Plates:15-32pieces
Number of Filter Frame:16-33pieces
Filtration Area:15-40㎡
Number of Filter Plates:18-49pieces
豫公网安备 41019702003169号