Automatic Sewage Treatment Filter Press Fundamental parts of a Sludge filter press

BBNEP focuses on wastewater treatment for more than ten years Our main equipment are Filter Presses, accessory devices, filter plates and filter cloths We guarantee that our equipment is higher in quality and more economic With management idea of “independent development and strict production management”, we stick to provide quality equipment and more economic wastewater treatment solutions,Automatic Sewage Treatment Filter Press.

Automatic Sewage Treatment Filter Press,BBNEP's diaphragm filter press adopts the method of reinforcing polypropylene filter plate and diaphragm filter plate alternately After one filtration, the diaphragm plate can be inflated to complete the pressing of the filter cake again, and the sludge is deeply dehydrated The moisture can be reduced to 30% or even lower And the frame part of the machine is made up of Q345 rectangular steel, which has stronger impact resistance After multiple anti-corrosion treatment, the service life is longer, which can ensure the stability and safety of the machine,Automatic Sewage Treatment Filter Press.

The design of BBNEP filter press is reasonable. The filter plate adopts central feed, which can make the whole filter plate evenly stressed during the filter press process, and there will be no filter plate deformation and slurry leakage. In addition, the filter press frame adopts a strict process, which can provide good and stable support for the filter part during the work process. Cooperation between these two points make the equipment achieve a good sewage treatment effect.

The filter plates of the filter press are closely arranged to form a closed filter chamber under the combined action of the keep plate and the thrust plate. Under the pressure of the feed pump, the materials are sent into each filter chamber. At this time, the pressure difference between the two sides of the filter cloth causes solid matter to be trapped in the filter chamber and gradually accumulate to form a filter cake. The liquid passes through the filter cloth, flows along the filter plate groove to the lower liquid outlet. After the filtration is completed, you can release the filter plate. The filter plate can be unloaded by manually or automatically pulling the filter plate in sequence. When the discharge is completed, the filter plate can be pressed again for the next cycle.

In the entire process of the implementation of the customer's project, BBNEP after-sales personnel will participate. The project manager is responsible for the scheduling and coordination of the on-site construction personnel, coordinates with the construction unit, responsible for overall engineering technical issues, and contacts Party A for construction coordination and cooperation. In addition, we will also grasp the quality control of each link of the construction, find the problem in time, solve it in time, and assist in the acceptance check of the project in stages.

After years of development and accumulation, the company has been favored by customers in the filter press industry. Whether in social benefits or economic benefits, they have achieved good results. The company will use this as an opportunity to steadily and steadily, while accumulating its own wealth, it will also create wealth opportunities for those in the industry. People from all walks of life are warmly welcome to visit our company, and we also welcome our customers to conduct on-site inspections and investigations.